Description
Competition Race 92A Polyurethane Front Engine Mount Insert for Mitsubishi Galant VR4 - E38A / E39A
Unleash the full potential of your Mitsubishi Galant VR4 - E38A / E39A with Mad Polly’s Competition Race Engine Mount Inserts. Proudly Australian-designed, owned, and manufactured, these mounts are crafted from premium, polyester-based polyurethane, trusted for its unmatched durability. Engineered for racers and serious enthusiasts, they deliver the ultimate in stability, longevity, and response.
🏁 Key Benefits
- As Stiff as Solid Steel, Without the Drawbacks: Enjoy the strength and stability of solid mounting without harsh vibrations and noise. Our polyurethane mounts offer near-solid rigidity, keeping your engine stable under heavy loads while maintaining comfort in your driving experience.
- Proven in High-Performance Applications: From 1,000+ horsepower drag cars to circuit cars, Mad Polly mounts have proven themselves by eliminating engine and driveline flex. Experience improved throttle response, smoother gear shifts, enhanced traction, and precise steering control—giving you the edge on the track.
- Race-Proven Stability and Control: Prevents excess engine movement, leading to sharper throttle response, smoother gear shifts, and improved traction. In front-wheel-drive vehicles, this reduces wheel hop and axle tramp, enhancing grip and stability off the line and through corners.
- Built to Last: Our mounts are poured from premium, Australian-designed polyester-based polyurethane, crafted from locally sourced raw materials. This top-grade formulation is engineered to withstand the extreme demands of both above and underground mining in Australia. Unlike ether-based materials that can crumble and deteriorate over time, this polyester-based polyurethane resists direct sunlight, petroleum, and oil products. Tested in continuous Gold Coast sunlight for over 15 years, it endures the harshest conditions without degradation, providing unmatched resilience and longevity.
🔍 Those other poly mounts you were looking at…?
- Have you checked if they use polyester or polyether, where their material comes from, or what grade it is?
- Not all polyurethane is made equally.
- For the best in quality and durability, always choose Australian-based polyester polyurethane material.
💰 Smart Investment
- Premium Quality at Affordable Pricing: Positioned below imported competitors, delivering exceptional value for high-quality performance.
- Long-Term Durability: Superior durability means fewer replacements, reducing long-term maintenance costs.
- Enhanced Resale Value: Adds value to modified vehicles by improving drivetrain stability and overall performance.
- Prevents Costly Drivetrain Damage: Minimizes drivetrain wear and tear from excessive engine movement.
📊 Proven Results
- Up to 70% Reduction in Engine Movement: Reduces excess movement for a more stable and controlled drive.
- Tested for 1,000+ HP Applications: Proven to withstand high-torque, high-power setups.
- Stable at Extreme RPMs: Maintains stability even at 9000+ RPM.
- Temperature Resilient: Successfully tested from -20°C to +120°C, ensuring performance in diverse conditions.
✅ Our Promise
- Lifetime Guarantee Against Polyurethane Failure: Built to last with a lifetime warranty covering polyurethane failure.
- Australian-Based Customer Support: Friendly, knowledgeable support from our team based in Australia.
- Satisfaction Guaranteed: We stand behind our products—your satisfaction is our priority.
🔧 DIY-Friendly Installation
Mad Polly’s Competition Race mounts are designed with the DIY enthusiast in mind. No hydraulic press is needed! To install, remove the OEM rubber from your existing mount casing while leaving the metal ring pressed in place. This design makes installation accessible to those without advanced tools, though some effort may be required to extract the rubber inserts.
🔧 Installation Information
Mad Polly mounts are designed with a slightly larger crush tube hole to allow easier alignment during installation. Due to the design involving the removal of the OEM rubber inserts (while retaining the original metal casing), fitment may vary slightly across different vehicles. Once bolted down, the clamping force secures the mount tightly, ensuring stability under extreme torque.
⚠️ Important Installation Notes
- Check Dimensions Before Ordering: Vehicle variations can affect fitment. Please verify dimensions below before ordering to ensure compatibility.
- If you are unsure how to do this it would be recommended to give it to your mechanic for them to do.
- New crush tubes are supplied with the poly inserts, the OEM crush tubes are not used.
Remeber to LEAVE THE INNER METAL RING IN
Simply heat up or cut out the original rubber, knock out the OEM rubber including the crush tube or cylinder, then replace it with our Mad Polly high performance insert.
* Please watch this video below for instructions on how to take out the original rubber insert and replace it with our item…
📐 Technical Specifications
| Mount Location: | Front |
| Mad Polly Code: | MPVR41 |
| To Suit OEM Part Number: | |
| Insert Diameter: | 65.8mm |
| Engine Mount Inner Width: | |
| Crush Tube Length: | 52 x 16.5mm |
| Uses OEM Crush Tube: | No |
| Slotted: | No |
| Colour: | Orange |
| Product Series: | Competition Race |
| Shore Hardness: | 92A |
| Material: | Polyester based Polyurethane |
🚗 Vehicle Compatibility
- Make: Mitsubishi
- Model: Galant VR4 - E38A / E39A
- Engine: 4G63
- Transmission:
- Mount Location: Front
- Years: 1987-1992
🇦🇺 Proudly Australian-Made and Owned
Every Mad Polly mount is 100% designed, manufactured, and owned in Australia, from the raw materials that make up the polyurethane to the final product. Our polyester based polyurethane material is developed by Australian chemists and sourced locally, ensuring top quality while supporting local Australian industry. By choosing Mad Polly, you’re not only investing in premium durability but also in true Australian craftsmanship.
Your purchase is greatly appreciated and helps support Australian businesses and families—from us at Mad Polly, to the team that pours the poly mounts, the machinists crafting the crush tubes from Australian steel, the skilled chemists formulating the poly material, and even our Brisbane based web hosting company. We all thank you for choosing Mad Polly and supporting local Australian industry.
🔄 Looking for a Smoother Ride?
If you want enhanced performance with a more balanced, street-friendly feel, check out our Performance Street Series (72A), designed for drivers who demand reliability and stability in everyday use.
Join thousands of satisfied racers and performance enthusiasts who trust Mad Polly for their critical drivetrain components. Proudly made in Queensland, Australia.
