Description
This is a Mad Polly PU 92A Right Polyurethane Engine Mount Insert upgrade for Mitsubishi 2003 – 2014 2.0 & 2.4 Lancer CG, CH and CJ with a 4G93 4G63 and 4G69 engine
These are specifically made as a performance upgrade so if you are considering modifying you’re engine then it may be a good idea to upgrade your mounts at some point too.
Stiffer PU engine mounts will prevent excess engine movement, which will result in improved throttle response, easier gear shifts, better traction and improved steering response, etc… This is a must-item for sports driving
100% locally made in Queensland, Australia. Not a Chinese import!
Available are the ‘orange inserts’ and crush tube, which means you should NOT throw away your original metal casing, but simply heat up or cut out the original rubber, knock it out including the crush tube or cylinder, then replace it with our Mad Polly high performance PU item.
*Please watch this video below for instructions on how to take out the original rubber insert and replace it with our item…
Remeber to LEAVE THE INNER METAL CASING IN
https://www.youtube.com/watch?v=YI8S3WYUYFE
The front and rear are our new Slotted version designed for less vibration for road use. Left and right are not slotted
If you are unsure how to do this it would be recommended to give it to your mechanic for them to do.
Also available for pickup in Mudgeeraba, Gold Coast, QLD
Models:
| 2003-2014 | Mitsubishi | Lancer | 2.0 GDi (CG,CH,CJ) | Sedan/Wagon | Petrol | RON92 | Set |
Engine mount dimensions
Inner width: 54mm
Inside diameter: 76mm
Crush tube length: 83mm
